0

MB SD C4 “00” Icon and Initialization Multiplexer Failed

MB-SD-C4-“00”-Icon-and-Initialization-Multiplexer-Failed-1

Problem: I got the MB SD C4 Xentry and EVG7 tablet full kit.   EVG7 displays “00” icon on Toolbar.  Also failed to configure SD C4 main unit.  How can i fix it? Xentry Software displays error: Initialization of diagnosis multiplexer… Continue Reading

0

How to setup GM Tech2 Tis2000 patch

crack-tis2000-05

This article is on why need to crack Tis2000 software and how to crack TIS2000 for GM / Opel. Why need to crack GM Tech2 Tis2000? For GM Opel tis2000: use D630 computer, you can insert the USB dongle to use… Continue Reading

0

BMW ICOM Software updata to V2020.03 Version

ICOM-V2020.03-Software-Display-1

For BMW Diagnostic Software version is update to V2020.03. ICOM Software can work with ICOM NEXT, ICOM A2+B+C, ICOM A3+B+C+D and ICOM P. It can diagnosis, programming & coding for all models of BMW. BMW ICOM V2020.03, With free Software:… Continue Reading

0

MB STAR C4 VS MB STAR C5

MB-STAR-C4-VS-MB-STAR-C5-1

In this blog we will compare the Mercedes Benz C4 vs C5 china clone Multiplexers. This should be a very short comparison The C5 is not really a C5 it’s just a C4 board inside a C5 shell and it does… Continue Reading

0

How to Activate OEM Porsche PIWIS III Developer (Engineer) Mode

How to Activate OEM Porsche PIWIS III Developer (Engineer) Mode

Porsche Piwis III Development Mode (also called Engineer Mode) enables users with special functions like modification or flashing. How to enable OEM Porsche PIWIS III to Developer (Engineer) Mode on Panasonic CFAX3 Laptop? 1. For Newer Porsche Models: Go to… Continue Reading

0

How to use VAS6154 head with Porsche Piwis 3

How to use VAS6154 head with Porsche Piwis 3

Project Piwis 3 PT3G => VAS6154-Kolun a look at below link when you take your right to use 1 have to have installed piwis 3 laptop. 2. install piwis 3 driver 3 put together vas6154 install the drivers for vas6154-piwis… Continue Reading

0

How do I use GM TECH2 to replace Opel Corsa C ECU

This article is just sharing real experience when use Tech 2 Scanner. Hope this helps someone. I decided to invest in some tools to diagnose my Opel. After a couple weeks of searching all over ebay, aliexpress and other online… Continue Reading

0

How to install Consult 3 software for Nissan on Win XP

We received a customer feedback “I failed to install Nissan Consult 3 software. My computer cannot identify the Consult 3 device, a message “unknown device” always appeared. How to install the drive? I also tried to install on Windows XP… Continue Reading