How to determine max OEM approved power on a Cummins engine
In this blog post we will tell You how we determine maximum OEM apporved power on Cummins engine based on the CPL number.
The most important thing to understand is that not all engines have same internal parts, no matter the fact that they are the same generation (CM2250/CM2350/CM2350A/CM871/CM2150D), same year, and same power.
The most important [...]
How to Find the Right OBD II Scanner for Your Vehicle
Finding the right OBD2 Scanner for your vehicle can open up a whole new world where you can not only see the error code but also directly address the issue with your car. [...]
Program Mazda2 2018 Smart Keyless Entry with Auro OtoSys IM600IM100
There are several key programmers will do Ford/Mazda, but seldom tools cover newer vehicles 2017 up. Both AURO OtoSys IM100/ IM600 Mazda software releases to latest and [...]
Tech 2 and OPCOM which is better for Opel steering angle sensor reset
Here are tips and guides of Opel steering angle sensor (SAS) calibration, incl SAS GM scan tools and FAQs…
What is steering angle sensor:
The steering angle sensor (SAS) [...]
Launch X431 scan tool and Maserati diagnostic Yes or No
Review and advice: Launch X431 Pro 3 and Maserati
The Launch X431 PRO 3 scan tool is what interprets the numbers into the algorithm of the clutch wear.
So for [...]
(Solved) Nexiq USB link with CAT ET connection error 149
I’m using a NEXIQ USB Link with CAT Caterpillar ET 2011b and I need some help with connection settings.
I was getting the error code 149 with CAT ET when trying to [...]
No Valid startkey detected-how to solve for MB SD C4C5
Recently i met this error when activate the V2018.7 MB SD C4, No Valid startkey detected
I contacted seller seven on the website www.obd2tool.com and she is so kind to [...]
VXDIAG Benz Star C6 Xentry diagnosis with DoIP better than C4 C5
VXDIAG Benz Star C6 Xentry diagnosis, supporting DoIP, performing diagnosis, repairs, program electric and electronic on-board vehicle systems, cover more functions during SCN [...]
How Does OBDII Work
OBD System History
The On Board Diagnostic (OBD) is a term that refers to systems in the vehicle that self-report issues. The system has its origins in the 1960s. During [...]
Ford Explorer Transmission Problem Analysis
Q. I am experiencing a problem with my transmission. I hit on the gas from 0 mph it rises steadily to about 30 mph, after that the acceleration stops for a couple of [...]
How to make icarscan more useful
Just received icarscan device, and downloaded iOS app. It is called "EZdiag" in the app store.
I am trying to decide which pieces of software I should download and looking [...]
Autel Maxisys Pro MS908P VCI Manager Operations
This application allows you to pair up the Autel Maxisys Display Tablet with the VCI device, either the J2534 Programming Device or the Bluetooth Diagnostic Interface, and to [...]
Obdstar X300 DP Plus works perfectly on Opel ECU Cloning
OBDSTAR X300 DP PLUS ECU Cloning User Manual:
What is ECU cloning:
ECU cloning is a technical process where existing engine computer information is duplicated onto a [...]
Program Mitsubishi L200 Triton Remotes with Super SBB2 and VVDI Key Tool
Success! I have used two car key programmers for my Mitsubishi L200.
I have Super SBB2 key programmer and VVDI Key Tool Xhorse, both off obd2tool.com
Here you [...]
How to update XENTRY Connect C5 software with .iso file
07.2018 Xentry Mercedes SD Connect c5 software update manual for newbies:
Important:
If you have XDOS 2018.3 or 2017.9 not working well, you should update it to [...]
wiTECH 2.0 Will Not Communicate With Any Modules – All Modules Are Red
Theory of Operation:
Below are few different ways communication on a vehicle takes place:
* Scan tool to the Central Gateway Module (Ex: SGW, TIPM, BCM, etc.)
* [...]