How to determine max OEM approved power on a Cummins engine
In this blog post we will tell You how we determine maximum OEM apporved power on Cummins engine based on the CPL number.
The most important thing to understand is that not all engines have same internal parts, no matter the fact that they are the same generation (CM2250/CM2350/CM2350A/CM871/CM2150D), same year, and same power.
The most important [...]
BMW ICOM Software updata to V2020.03 Version
For BMW Diagnostic Software version is update to V2020.03. ICOM Software can work with ICOM NEXT, ICOM A2+B+C, ICOM A3+B+C+D and ICOM P. It can diagnosis, programming & [...]
How to Set Wifi Connection for Mercedes SD C4C5
Mercedes SD C4 is professional diagnostic and programming tool for Mercedes Benz cars and trucks. When you received the C4/C5 multiplexer, you may would like to connect it [...]
MB STAR C4 VS MB STAR C5
In this blog we will compare the Mercedes Benz C4 vs C5 china clone Multiplexers.
This should be a very short comparison The C5 is not really a C5 it’s just a C4 board [...]
Autel MaxiIM IM608 Add New Smart Keys for Volvo XC60
Here Obd2tool.com share the guide on how to use Autel IM608 to program new Semi-smart keys for Volvo XC60.
Devices:
Autel MaxiIM IM608 [...]
(Solved)IM608IM600 Error”This function is available on a pay-per-use basis. Continue or not
Customer issue:
Just found this in advance mode after new update. When try to program VW 4th immobilizer all keys lost, Auro OtoSys IM600 Auto Key Programmer gives error [...]
VXDIAG ODIS SDD GDS Pathfinder IDS Xentry ISTA Language List
Here Obd2tool.com list all possible language list of VXDIAG scanners.
VXDIAG Ford/Mazda IDS Language
English, French, Italian, German, Spanish, Danish, Chinese, [...]
How to Activate OEM Porsche PIWIS III Developer (Engineer) Mode
Porsche Piwis III Development Mode (also called Engineer Mode) enables users with special functions like modification or flashing.
How to enable OEM Porsche PIWIS III to [...]
How to use VAS6154 head with Porsche Piwis 3
Project Piwis 3 PT3G => VAS6154-Kolun a look at below link when you take your right to use
1 have to have installed piwis 3 laptop.
2. install piwis 3 driver
3 put [...]
Cold Mode and No Engine Speed on Status Flags Caterpillar ET Software
"Cold Mode" and "No Engine Speed" on Status Flags
Cold Mode
-The ECM limits engine power during cold mode operation and the ECM modifies injection timing during [...]
How to use and install XPROG V6.12 on Win XP Win7Win8
X-PROG box ECU programmer has been updated to newest version 6.12. It comes with USB dongle, no need activation. With new generation hardware, runs more steady and faster than [...]
How to use WOYO PDR Light for Auto dent repair
Q: Can i use WOYO PDR Light for direclty remove the car dent?
A: No, WOYO PDR Light is a tool for you to easily find out the car dent under any condition of light source. [...]
How to adjustment mileage for Seat Ibiza 6J 2014 with Digiprog 3 v4.94 via OBD
Tutorial: How to adjustment mileage for Seat Ibiza 6J 2014 with Digiprog 3 v4.94 via OBD
Vehicle: Ibiza 6J 2014
Tool used: Digiprog 3
Work: change mileage from 70001km [...]
2006 Buick GL8 First Land Oil Reset with Launch X431 V+
This post guides you on how to use Launch X431 V+ to do 2006 Buick GL8 First Land Oil Reset.
Car: ShangHai GM Buick,2006
VIN: LSGUD82C36E029343
Tool: Launch X431 [...]
Piwis Tester 2 Work For Porsche Cayenne 2014 Kessy Module Matched
How Does Porsche Piwis2 Matching Porsche Cayenne 2014 Kessy Module
Piwis Tester 2 is Piwis Scan Tool for Porsche Scanner, Piwis Tester 2 with latest V18.150.500 software [...]
DATA ERROR on AUX Temp (Auxiliary Temperature) and Settings on Caterpillar ET Software
AUX Temp (Auxiliary Temperature)
AUX Temp Sensor is optional equipment, with CAT P/N 370-3830.
-Additional installed for the Zone 2 Area or Hazardous Location,
-Installed [...]