This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is synchonized with the version installed on the application PC. The Bluetooth VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC.The Diagnostic Base System can access the VAS 5054A via Bluetooth or USB.
Access via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.
Access via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use
by the diagnostic application.
Renault CAN CLIP ISO no communication error fixed at Obd2tool.com
Some Renault CAN CLIP diagnostic tool users reported that they had ISO communication error when using the device. Here is the proper solution provided.
Problem:
1) When I connect the Renault CAN Clip Interface to the OBD diagnostic socket and with PC via USB port, it gave me just 2 indicators, but the green ISO indicator does not flash, and no communication with the probe.
2) I first installed the CAN CLIP software on my Dell Win XP SP3 laptop, Software installation went ok, so did registration. Then I connected Can Clip interface to laptop and to car. Computer found USB device and driver were installed. Then second USB device and again, driver were installed. Then no more USB devices were found. I tried all other USB ports in laptop with same result. I uninstalled Can Clip software and re-installed it on another laptop with same result.