The tutorial is to program a new smart key on the car 2017-2019 Nissan X-trail. Key programming and pin code calculation is performed by the Lonsdor K518ISE Key Programmer.
Key information:
ID47 Hitag 3 (AES) chip
3-button smart keys
Procedure:
Connect K518 with vehicle
Turn on ignition switch
Select Immobilizer->Nissan->Select from vehicle->X-tail->T32-> Proximity smart->Program smart key
Turn on emergency light/turn ignition off
All keys will be deleted
Security checking
Press and release car start button, put the log end of the 1st smart key close to the button until the dash turns on and the security indicator flashes 5 times.
Press Start button once and turn off ignition
Program 1st key completed.
Follow steps above to program next key until complete
Press car Start button,put the log end of the 1st smart key close to the button until the dash makes sound
Press Start button once and turn off ignition
Press Start/Stop button once to check if engine can be started
Then test remote control.
nissan-xtrail-lonsdor-k518-17
Lonsdor k518 successfully added a new smart key to X-trail 2017.