Any of Launch X431 Pad VII, European Euro Tab III, MM4.0 (other devices can buy “Motor Angle Calibration” function in Mall module) can calibrate the rotation angle sensor of the motor for BMW, MINI, Toyota, Lexus, Honda, Acura.
Why it is necessary to calibrate the rotation angle sensor of the motor?
A resolver is a type of rotation angle sensor for controlling the drive motor that is the power source of EVs. By efficiently controlling the motor, power consumption can be suppressed. To control the motor according to various driving conditions of a vehicle, it is necessary to detect the magnetic pole position of the motor and accurately grasp its rotational speed. The resolver serves as a sensor for these tasks.
Image 1. Rotation angle sensor (resolver) for EV/HEV electric motor
The speed of the motor that is the heart of the electric vehicle, when the motor is working in a high temperature environment or in a humid, dusty and other environment for a long time, the resolver (rotation angle sensor) is prone to failure. After the failure, the rotation angle sensor signal is faulty, resulting in the motor not working normally, reducing the system reliability, and affecting the normal driving of the vehicle.
At this time, it is necessary to calibrate the rotation angle sensor of the motor.
Motor Angle Calibration Guide with Launch X431
Take Toyota as an example:
1. Enter Motor Angle Calibration V10.00, Click “TOYOTA”.
2. Click “Avalon HV”.
3. Note “select the vehicle mode menu according to the vehicle model on the nameplate”, and click “OK” to continue.
4. Click “AXXH50”.
5. Click “A25A-FXS”.
6. Confirm the info and click “OK”.
7. If communication abnormality occurs during the test, please ensure whether the vehicle is equipped with other parts. If other parts are installed, you can try to remove the parts and then perform the test. Click “OK” to continue.
8. Click “Motor generator”.
9. Notice “this ECU controls the power conversion apparatus for driving two motors and the voltage conversion device”, click “OK” to continue.
10. Click “Special Function”.
11. Select the resolver you want to relearn or initialization; here we select “Resolver Learning/Initialization”.
12. This function is used to learn and initialize the correction amount for resolver variations. Refer to the repair manual when you use this function. Press “OK” to proceed.
13. Select “Initialization”.
14. The initialization is ready, turn the IG off; after the IG is OFF, follow the instructions in the repair manual.
That’s all, this is how to use any of Launch X431 PAD VII, European Euro Tab III, MM4.0 to do Motor Angle Calibration.
If you want to know more about Launch X431 , please contact us sales@obd2tool.com.