0

Program Chrysler Heated Seat Module (HSM) with Witech

witech-program-hsm-1 (2)

SYMPTOM/CONDITION: The heated steering wheel shuts off to soon, usually after 30 seconds and does not achieve satisfactory temperature. This is an intermittent condition and more noticeable at temps below 19.5°C (67.1°F). MODELS: 2015    (WK)    Jeep Grand Cherokee 2015    (W3)  … Continue Reading

0

Unable to access wiTECH 2.0 when DealerCONNECT site is unavailable

Unable-to-access-wiTECH-2.0-when-DealerCONNECT-site-is-unavailable-1

At any time DealerCONNECT site is unavailable this affects the wiTECH 2.0 system. Detailed below are a few behaviors that you might encounter while attempting to use Chrysler wiTech MicroPod 2, but unable to do so, due to DealerCONNECT site… Continue Reading

0

How to update the wiTECH Diagnostic Application software

How-to-update-the-wiTECH-Diagnostic-Application-software-1

NOTICE: Please perform an update of your wiTECH diagnostic applicaiton as soon as possible to ensure your proper functionality. 1.  IMPORTANT STEP: Close the wiTECH application! If you are running the wiTECH Diagnostic Application, close it before starting the installation… Continue Reading

0

Chrysler Mircropod 2 and AppCar FCA Software Introductions

What is Appcar DiagFCA: Appcar DiagFCA is a professional diagnostics & programming software for Chrysler, Dodge, Jeep and RAM vehicles The Appcar DiagFCA software allows you: *Read and erase all DTC Fault codes from all systems available on the vehicle,… Continue Reading

0

Solution to Chrysler Diagnostic Tool wiTech MicroPod 2 V17.04.27 register error

Issue:“Registration is needed Device with serial number** is not registered. Please check the knowledge base to determine how to register a device”   Working Solution: 1.Right click Witech Diagnostic Application-> Properties->Open file location   2.Enter C:/Program Files (x86)/DCC Tools/wiTECH/client. Open… Continue Reading

0

OEM witech Micropod2 Clone Review on Dodge DS and WK

Here is all my ideas of wiTech MicroPod 2 Clone before and after purchase. Have posted in dodge-dart forum. Now, i’d like to do collected and share with more fellows. Hope it’s helpful Before purchase: Though I haven’t tried it personally… Continue Reading

0

Configuring Device and Network Settings

Using the HTTP Interface Shown below is the main screen for the device configuration web site. The Overview page will provide you with version information for the hardware and software and the device serial number. System Setting You can assign… Continue Reading

0

Mircopod 2 wiTech Error “Registration is needed”

Chrysler WiTech MicroPod 2 V17.04 diagnostic and programming interface for Chrysler fits in your shirt pocket and provides 100% CAN coverage for Chrysler, Dodge, Jeep and Fiat. Recently,we received feedback the problem of wiTech MicroPod register problem. The warning massage “Device… Continue Reading

0

Free Download V17.03.01 wiTech MicroPod 2 for Chrysler

3-1

The latest wiTech MicroPod 2 Chrysler diagnostic and programming software goes to V17.03.01. here provides you free download resources. Free download Chrysler wiTech MicroPod 2  V17.03.01 software Password: 5uka Compatible interface: Chrysler diagnostic tool wiTech MicroPod 2 Diagnostic Programming Tool… Continue Reading