0

New Holland Electronic Service Tools(CNH EST 9.4 9.2 8.6 engineering Level )+ Diagnostic Procedures + White CNH DPA5 kit diagnostic tool

New-Holland-Electronic-Service-Tools-CNH-EST-9.4-2

The software is 9.4 9.2 engineering level, CNH EST 8.6 software is dealer level.engineering level has more functions than dealer level and CNH 9.4 9.2 is with diagnostic procedure. NOTE: 1.If you choose Heavy Duty Truck Software CNH EST 8.6 Dealer… Continue Reading

0

ISUZU N-Series Fuel Injector Flow Rate Programming by IDSS

ISUZU-N-Series-Fuel-Injector-Flow-Rate-Programming-by-IDSS-1

When replacing the injector,it is necessary to register the ID code printed on the upper part of the injector with handheld tester in the engine ECU.So here i will show you guide on how to use Heavy Duty Truck Scan Tool… Continue Reading

0

How to Install Volvo Premium Tech Tool PTT Software

How-to-Install-Volvo-Premium-Tech-Tool-PTT-Software-33

This article show the guide on how to install Volvo Premium Tech Tool PTT diagnostic software. Before install Volvo PTT software,click: Volvo PTT Premium Tech Tool All Version Free Download To download the Volvo Premium Tech Tool software,the article include:… Continue Reading

0

How to Install Volvo Premium Tech Tool PTT Software

How-to-Install-Volvo-Premium-Tech-Tool-PTT-Software-2

This article show the guide on how to install Volvo Premium Tech Tool PTT diagnostic software. Before install Volvo PTT software,click: Volvo PTT Premium Tech Tool All Version Free Download To download the Volvo Premium Tech Tool software,the article include: Volvo… Continue Reading

0

How to fix the CAT ET SIS error #142 – requested baud rate is invalid

cat-et-sis-error-142-requested-baud-rate-is-invalid_orig

This means you have communication error between your CAT II / III adapter and the CAT ET Software setup. Usually it is a simple fix. – In the CAT software go to UTILITIES   =>   PREFERENCES   =>  COMMUNICATIONS – CHOOSE: CATERPILLAR COM… Continue Reading

0

Using Segment and Reset on Caterpillar ET Software

Using-Segment-and-Reset-on-Caterpillar-ET-Software-1

Using Segment and Reset on Caterpillar ET Software Segment and Reset 1). SEGMENTS The “Segment” function allows performance parameters and totals accumulated to be viewed. -Different parameters display for the data analysis. -Trip Segment functions and data currently available on… Continue Reading

0

Cummins Inline 7 vs Nexiq USB Link 2

I am going to by by adapter for Cummins but I am confused between Inline 7 and Nexiq USB Link 2….. please any advice and what is the difference between both of them. Thanks Advice.. here you go Mikeservice: Nothing… Continue Reading

0

Test the Connection to the Vehicle using NEXIQ Device Tester (USB-Link™)

Test-the-Connection-to-the-Vehicle-using-NEXIQ-Device-Tester-1

Test the Connection to the Vehicle Use the Device Tester to test the connection between the USB-Link™ and the vehicle. At startup, the Device Tester checks for any NEXIQ USB Link drivers installed on the PC. -Download NEXIQ Product Driver here:… Continue Reading

0

How to Program Injectors for Caterpillar C7 Engine with CAT Caterpillar ET Diagnostic Adapter III?

cat-et-software

2020A is an upgraded version of 2019C , A represents the first quarter, and C is the software updated in the third quarter.   2020A Cat ET software as Cat Caterpillar ET 2018C 2019A 2019C Software update version, 20120A Caterpillar… Continue Reading