0

VXDIAG Porsche PIWIS 3 PTG3 Model List

VXDIAG-Porsche-PIWIS-3-PTG3-Model-List-1 (2)

Look here: Allscanner VXDIAG VCX DoIP Porsche Tester PIWIS 3 vehicle coverage Compatibility: Porsche from year 2005 to 2018, including post-2017 vehicles with DoIP protocol Porsche 911(997) (991) Boxster/Cayman (987) Cayenne up to MY 2010 Cayenne from MY 2011 Panamera… Continue Reading

0

Nissan Consult 3 Plus Reprogramming ECU TCM Guide

Nissan-Consult-3-Plus-Reprogramming-ECU-TCM-Guide-17

This article show a guide on how to use Nissan Consult 3 Plus to reprogram Engine Control Module(ECM) or Transmission Control Module (TCM). Note:A symptom based TSB isrequired before using this procedure.This procedure does not apply to Nissan LEAF?. IMPORTANT: Before… Continue Reading

0

PIWIS III with V38.90 Software Supports All Porsche from 1998 to 2019

PIWIS-III-with-V38.90-Software-Supports-All-Porsche-from-1998-to-2019-1

OEM PIWIS III with V38.90 Porsche software dual system dual SSD installed on Lenovo Yoga12 I5 8G touch screen laptop, full set ready to use. Software version: Dual system , V38.90 without engineering software, V38.20 with engineering software, both can… Continue Reading

0

Program Chrysler Heated Seat Module (HSM) with Witech

witech-program-hsm-1 (2)

SYMPTOM/CONDITION: The heated steering wheel shuts off to soon, usually after 30 seconds and does not achieve satisfactory temperature. This is an intermittent condition and more noticeable at temps below 19.5°C (67.1°F). MODELS: 2015    (WK)    Jeep Grand Cherokee 2015    (W3)  … Continue Reading

0

How to use VXDIAG Subaru SSM3 to Perform Force Sensor Calibration

Why require a Force Sensor Calibration? After EPB actuator assembly installation is complete (address DTC C0251), the Force Sensor Calibration Mode must be performed with the Subaru Select Monitor following the procedure. Caution: Subaru Select Monitor (SSM-III) is required for… Continue Reading

0

ODIS SOFTWARE DOWNLOAD

Here I list the download link of the ODIS software. There are a few statements below. 1: Some software has not been tested, the security cannot be guaranteed, obd2tool blog does not take any responsibility, please know. 2: These links… Continue Reading

0

Unable to access wiTECH 2.0 when DealerCONNECT site is unavailable

Unable-to-access-wiTECH-2.0-when-DealerCONNECT-site-is-unavailable-1

At any time DealerCONNECT site is unavailable this affects the wiTECH 2.0 system. Detailed below are a few behaviors that you might encounter while attempting to use Chrysler wiTech MicroPod 2, but unable to do so, due to DealerCONNECT site… Continue Reading

0

GM MDI Programming Manual

MDI-interface

GM has had its newest programming/J2534 Pass Thru device on the market for some years now. A lot has been said about it and I am here to tell you that I have finally taken the plunge into GM MDI Scan… Continue Reading

0

iCarScan 2.0 review Check Mercedes ABS ESP read data stream

Here tested ICARSCAN new launched tool iCarScan 2.0 check Mercedes ABS ESP sensor status and read real-time data stream! All OK. Check iCarScan app screenshots below… iCarScan price to let you know first: iCarScan 2.0 Bluetooth OBDII Scanner Android IOS… Continue Reading