0

What should I do if the storage capacity of Launch X431 is not enough

What should I do if the storage capacity of Launch X431 is not enough? Launch X431 scan tool (i.e X431 V, X431 V+ etc) allow the user to expand the storage capacity from 32GB to 128GB.

Next part is about how to use TF card to extend memory in X431 V:

Prepare:

*   Launch X431 V (for example)
*   One TF card: Over 8 gigabyte (GB), with the speed of Class 10 (which is over 10 megabyte per second).
*   One screwdriver

Launch-X431-storage-capacity-is-not-enough-1

Simple procedure:

*   take off the plastic protection sleeve from its backside.
*   Remove all the screws.

Launch-X431-storage-capacity-is-not-enough-2

*   Set aside the back cover and take out the tablet.
*   There is a TF card socket at the right side of the tablet where we insert the TF card.

Launch-X431-storage-capacity-is-not-enough-3

*   Start up the tablet.

Open “Setting” and choose “Storage”.

Click on “SD card”, here we need to set it up first, so choose “Set up”.

Choose “Used as internal storage”;

Next is “Erase and format”, it takes a few minutes in this step;

Next is to choose “Move now”, it takes a few minutes according to the data size.

Launch-X431-storage-capacity-is-not-enough-4
Launch-X431-storage-capacity-is-not-enough-5
Launch-X431-storage-capacity-is-not-enough-6
Launch-X431-storage-capacity-is-not-enough-7
Launch-X431-storage-capacity-is-not-enough-8
Launch-X431-storage-capacity-is-not-enough-9
Launch-X431-storage-capacity-is-not-enough-10

*   Job is done. Launch X431 V successfully used TF card to extend the internal storage, and the procedure is applied to X431 V+ and any other X431 tools.

Launch-X431-storage-capacity-is-not-enough-11

Good luck!

Leave a Reply

Your email address will not be published. Required fields are marked *