Program Toyota Camry 2016 8A All Smart Keys Lost using Autel Simulator via OBD

How-to: program Toyota Camry all smart keys lost, generate simulator and add new smart key with Autel MaxiIM IM508 and APB112 simulator.

Vehicle Model: Toyota Camry 2016 hybrid
Key chip: 8A
Lost all keys, new smart key cannot turn on
key not detected and remote do not function
autel-im508-toyota-camry-akl-0
autel-im508-toyota-camry-akl-1

Device required:

Autel IM508/IM608

XP400 Adapter

Autel APB112 smart key simulator

A new smart key

autel-im508-toyota-camry-akl-2

Main Step:
1. Read IMMO data
2.Generate Simulator Key
3. Add Smart Key

Step-by-step procedure:
autel-im508-toyota-camry-akl-3

Connect APB112 with IM508 via USB cable
Select IMMO->Toyota->Manual Selection->Other->Camry->Smart key->Keyless System (CAN)

autel-im508-toyota-camry-akl-4
autel-im508-toyota-camry-akl-5

autel-im508-toyota-camry-akl-6

1. Back up Immobilizer Data
This function is use to back up the EEPROM data of the smart box.
The data can be used to generate the simulator key for emergency start of the vehicle to perform the key programming function.

autel-im508-toyota-camry-akl-7
Reading immobilizer data

autel-im508-toyota-camry-akl-8
Connecting network. Need stable WiFi network
Write name file and press OK to save dump

autel-im508-toyota-camry-akl-9
Backup succeed

autel-im508-toyota-camry-akl-10

2.Generate Simulator Key

autel-im508-toyota-camry-akl-11
Select Generate Simulator Key
Select the EEPROM data
Choose backup file

autel-im508-toyota-camry-akl-12

autel-im508-toyota-camry-akl-13
Retrieving critical data
Generate simulator key in process

autel-im508-toyota-camry-akl-14
Show key type SLK03
Connect APB112 key simulator

autel-im508-toyota-camry-akl-15
Obtain software name and version

autel-im508-toyota-camry-akl-16
Burning firmware until succeed
The simulator key is generated successfully
The simulator key can be used to turn the ignition on in case of emergency to learn the key

autel-im508-toyota-camry-akl-17
Put the simulator key on Start/Stop button and press

autel-im508-toyota-camry-akl-18
The key can start engine now.

Don’t disconnect USB cable

3. Add smart key
Use the simulator key to turn on ignition

autel-im508-toyota-camry-akl-19
Select Add Smart Key
Confirm to use the simulator key APB112
Each step must be completed within the specified time.
The position for learning: 5

autel-im508-toyota-camry-akl-20
Put the simulator key APB112 close to Start button

autel-im508-toyota-camry-akl-21
You will hear a beep sound
Put the new smart key to learned close to the Start button

autel-im508-toyota-camry-akl-22
beep beep
Registering key in process

autel-im508-toyota-camry-akl-23
Learning key succeed
Test remote and star vehicle

autel-im508-toyota-camry-akl-24

autel-im508-toyota-camry-akl-25
Done.

autel-im508-toyota-camry-akl-26

Note: APB112 simulator need to work with Autel Scanner XP400 (not  XP200) and compatible with IM608, IM508, MX808IM. It is not only a smart key simulator, but also 46, 4D data collector and ID46 password calculator.

Add Comment

Required fields are marked *. Your email address will not be published.