Month: February 2018

Porsche Piwis II Tester дилерский сканер

Porsche Piwis ii - второе поколение дилерского сканера для автомобилей Porsche. Прибор [...]

CGDI BMW program new remotes to BMW 530Li CAS3

Test report: CGDI Prog BMW and BMW 530Li 315 remotes Place: www.obd2tool.com Device: CGDI Prog BMW Key Programmer Car: BMW 530Li Basic vehicle [...]

XentryDAS Expire, How to solve

Here is 12.2017 Xentry/DAS Expire Error Message and Solution: Xentry/DAS Expire Error: La validata dell’attuale versione dei dati scadra dal [...]

Lonsdor K518ISE remove the capacitance so you can use your power supply

Topic: how to remove the capacitance on Lonsdor K518ISE PCB so that you can use your own power supply and avoid the machine smokes. Tools to [...]

How To Activate 2017.12 MB SD Connect C4 C5 Xentry

User guide:how to activate 2017.12 MB SD Connect C4/C5 start key Step-by-step ,here you are: Step 1: Double Check the icon name ” ConfigAssist” which [...]

How to change the oometer on Peugeot 2004 BSI HC05 With OBDSTAR X300 DP?

OBDSTAR X300 DP/X300pro 3/Key Master/Key Master DP has released free Pin code reading, ecu auto identification, eeprom read/write, odometer correction [...]

DSP3 Mileage Correction CONNECTIONG TO INTERNET

Connect the machine to PC over the USB cable, install USB driver at first (see the video help file:CD: \dsp3\drivesoft.rmvb) then setup acticesync.exe(see the [...]

Launch X431 V 8 inch tablet feedback full systems + Indian Malaysia cars

Having a perfect Bluetooth OBD 2 scan tool is one of the most exciting things that could have ever happened in the repair life. That is especially when you [...]

Launch X431 V 8inch Tablet tested vehicle list-89 diagnostic software in total

Launch X431 V 8inch Tablet WiFi Bluetooth scanner is tested to cover 89 diagnostic software in total, this is tempting if you have many car brands to fix. To [...]

SuperOBD SKP-900 Operation Instruction

This operation instruction will tell you how to use your scan tool. For other vehicles, you can perform it by referring to the instructions or according to [...]

Tech 2 Performing Off-Board Programming Adapter (OBPA) Remote SPS

The OBPA is used in situations where a module must be programmed without having the vehicle present. This need may arise, for example, when a dealership parts [...]

Tech 2 Connection to Techline Terminal

At times the Tech 2 will need to be connected to a terminal. Reasons for connection to a terminal include the following: *  Transfer of vehicle data [...]