The VAS 5054A OKI Chip is a universal diagnostic interface designed for vehicles of Volkswagen group and other OBD vehicle systems from Skoda, Audi, Seat, Lamborghini and Bentley. The integrated Bluetooth interface connects your vehicle with a PC, desktop or test system. The range of the wireless Bluetooth connection is 2 to 5 meters, depending on the environment and the type of Bluetooth adapter used on the PC side. The Serial Port Profile ( SPP ) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported. No cables are needed for vehicle diagnostics using the VAS 5054A. With the integrated OKI chip, it can support the UDS protocol found on newer vehicles.
VAS 5054A With OKI Chip VW ODIS V3.0.1 Plus Dell D630 laptop ready to Use
The diagnostic base system can access the VAS 5054A via Bluetooth or USB.
Access Via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.
Access Via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the OBD2 vehicle diagnostics VAS 5054A is then complete and the device is ready for use by the diagnostic application.

Renault CAN Clip V165 is best and professional tool for Renault from 1998-2016. CAN Clip Renault Interface provide you multi-function and wide system coverage for Renault Models: automatically test all Renault models’ computers, reporgramming, airbag test and other functions.

Update notice: Renault CAN Clip V160 is available to use! Here are Renault Can Clip V160 download links and installation steps on Windows XP. Download and install to get a new experience with Renault Can Clip diagnostic interface now!
High Quality Renault CAN Clip Diagnostic Interface With IBM X200T Laptop Full Set Ready To Use
How to install Renault Can Clip V160 in steps?
Step 1: Install DAEMON Tools Lite
Step 2: Run Crack Renault CLIP
Step 3: Install CLIP 160
Step 4: Setup CLIP properties
Step 5: Register CLIP
Step 6: Setup in Computer management
Now Renault Can Clip Scanner V160 is installed successfully.

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website