Fgtech galletto instructions although OBD2 Scanner don’t join trunk line

When i with success study by trunk setting this ecu.. no problem switch electricity give with galletto.. make an effort to study as principles look turn off switch join overcast cable tv for you to pin 28, electricity with give and also clear away overcast cable tv and also push OKAY or future.. and it also can study no problem might be oughout possess dilemma using Fgtech galletto, make an effort to study this by typical modem line ecu seeing that proven with graphic, pick ecu by list and also attempt ecu info in the event this is effective, trunk setting have to way too..

typical setting: When i intended make sure you attempt study this with bench join most of electrical wires seeing that proven throughout Fgtech galletto instructions although OBD2 Scanner don’t join trunk line and also throughout galletto pick throughout menu typically renault-> thalia or When i have no idea of which one you could have, ECU must be right will not examine style of a vehicle and also make an effort to ECU identity this need to operate.. The only one variance is always that throughout trunk setting galletto study 256kb with thumb and also by typical setting exclusively 32kb.

i have cina Fgtech galletto although When i improved some pieces indoors for you to thoroughly operate mainly because I have dilemma using Kline study.. Plus I have dilemma using ECU Siemens sirius32and When i associated with connector by galletto the particular one line -yellow- and that is for L : line was desoldered hence When i mended this and it also is effective and also When i attempt this with bench, this study ECU okay hence in that case When i make an effort to trunk setting and it also is effective.

Switch 270 OHM resistor FOR YOU TO 2700 OHM resistor
switch 470 OHM resistor FOR YOU TO 4700 OHM resistor
and also switch enterprise by HEF40106BT FOR YOU TO HCF40106

seeing that When i authored I have dilemma using Kline. canbus, bdm proved helpful very well although nited kingdom line fails hence when i followed this restoration alternative and from now on this is effective!

Somebody requested need to he ahead of the information copy by HEF40106BT FOR YOU TO HCF40106? or perhaps HCF40106 soldering and it is ready?

What you need can be simply no. the exclusively EX-MATE SCHMITT RESULT IN Inverters, the exclusively enterprise, simply no info indoors. people buy this pieces for bit of money.. exclusively desolder old and OBD II Scanner also solder different compoments and it also need to operate attempt this.

Ahead of restoration, when i includes kline dilemma which i tried using ecu identity, create or study and also galletto was usually demonstrating fault ecu wakeup and also soon after when i improved this components this is effective great.

Add Comment

Required fields are marked *. Your email address will not be published.