How to determine max OEM approved power on a Cummins engine
In this blog post we will tell You how we determine maximum OEM apporved power on Cummins engine based on the CPL number.
The most important thing to understand is that not all engines have same internal parts, no matter the fact that they are the same generation (CM2250/CM2350/CM2350A/CM871/CM2150D), same year, and same power.
The most important [...]
Lonsdor K518ISE Program MITSUBISHI OUTLANDER 2 2009 Remote Key
Lonsdor K518S Key Programmer new feedback: MITSUBISHI OUTLANDER 2 2009
Program remote and program immo, blank PCF7936
ALL OK
Credit to Mr. Duraj
Picture [...]
Lonsdor K518ISE Great Wall Vehicle List
Here comes the Great Wall immobilizer key programming list of Lonsdor K518ISE/K518S key programmer.
GREAT WALL MOTOR\Great Wall\Peri\Industrial traffic IMMO [...]
Lonsdor K518ISE Program BMW CAS2 528i Remote Key
Lonsdor K518ISE Key Programmer has successfully programmed a remote key on a BMW 528i CAS2 immobilizer system via OBD2.
Procedure:
Connect K518 host with vehicle via [...]
Program Nissan X-trail 2017 Smart Key with Lonsdor K518ISE
The tutorial is to program a new smart key on the car 2017-2019 Nissan X-trail. Key programming and pin code calculation is performed by the Lonsdor K518ISE Key [...]
How to read & decode BMW CAS4 5M48H with XPROG-M Programmer?
This article shows the procedures on reading & decoding BMW CAS4 5M48H with XPROG-M Programmer.
Procedures:
Remove BMW CAS4 module and get 5M48H [...]
How To Change Mileage For OPEL With OBDSTAR X300 DP PLUS
Here is the OBDSTAR X300 DP PLUS newest update for OPEL Odometer correction
Adds vehicle:
Adam 2012 –
Combo 2011 –
Karl –
Insignia-
Vivaro 93c76-
Corse [...]
BMW FEM Mileage Reset Tool VVDI2 BMW Or Yanhua mini ACDP
Two BMW FEM mileage reset tools are using and verified working fine. They are VVDI2 BMW and Yanhua Mini ACDP and FEM Authorization.
Purpose: To reset mileage for F30 2014 [...]
How to do BMW CAS DME Sync After New Programmed Key Failed to Start Car?
Problem:
I’ve done 1x CAS2 with CGDI BMW – 2006 E90 Diesel
ELV sync was OK
CAS sync failed, ERROR and would not start
car did not start until i used another tool to [...]
How to Set up DTS Monaco for VXDIAG Benz C6
Q: How can i configure DTS monaco engineering software to work with the VXDIAG Benz C6 scanner? Can you provide manual or video operations? Or set it up via [...]
Difference between MB Star C3 and MB Star C4
Many times ago, i saw a blog about MB SD Connect C4 for benz, the author said he like this tool very much, and make a comparison with mb star c3 for a result that MB Star C4 [...]
How to Set WiFi for MB SD Connect C4 PLUS DoIP?
New MB Star SD Connect C4 PLUS DoIP diagnostic multiplexer enables WiFi/WLAN and USB connections. Check the step-by-step wifi setting guide below:
Open [...]
VXDIAG Benz C6 Driver Update to V3.1.1.606
Allscanner VXDIAG Benz C6 DoIP diagnostic scanner driver update to 3.1.1.606
Benz C6 Driver Update V3.1.1.606
* FIX: XENTRY Software was abnormally crashed when [...]
VXDIAG Multi Tool Connection via USB, LAN and WiFi
This is VXDIAG multi tool connection guide.
VXDIAG Hardware Connection have three connection mode :
USB Connection
LAN Connection
WiFi Connection
VXDIAG USB/LAN [...]