How to determine max OEM approved power on a Cummins engine
In this blog post we will tell You how we determine maximum OEM apporved power on Cummins engine based on the CPL number.
The most important thing to understand is that not all engines have same internal parts, no matter the fact that they are the same generation (CM2250/CM2350/CM2350A/CM871/CM2150D), same year, and same power.
The most important [...]
How to solve the problem of five icons appearing on the MB STAR C4/C5 display
There are five icon problems on the C4/C5 display
Five icon problems appear on the MB Star C4/C5 display
Connect 9V dry battery as shown
Connect the OBD to [...]
Autel IM608 Program Audi RS7 2014 Key without Unplug BCM2
Test report:
2014 Audi rs7 added second key through obd in around 10 minutes, Autel IM608 asked me to do energize the BCM and that slowed me down a bit. Im608 is [...]
Autel MaxiIM 508 Most Detailed IMMO Application Instruction
Why Autel MaxiIM IM508 is the perfect solution for shops and technicians who demand affordable and powerful IMMO and diagnostic services?
Reason checked out:
It is a [...]
How to Enable Chevrolet Impala Afterblow with GM Tech2
Problem:
I am getting a funky smell when I turn the AC on in my 2007 Chevrolet Impala. I figure the cabin air filter has gotten something bad in it. Just wondering where to [...]
Land Rover 825 Watt Surround Sound System Retrofit Configuration by JLR SDD
This post show you the configuration of Land Rover 825 watt surround sound system retrofit by JLR SDD diagnostic software.
Land Rover Discovery 4 Parts:
3 SRS [...]
Installing Techline Connect
Techline Connect — GM’s latest tool that brings together diagnostic information and vehicle data in one easy-to-use application — is currently being rolled out by state [...]
GDS2 Transitioning from TIS2Web to Techline Connect
Techline Connect is quickly becoming the source for all diagnostic applications in the dealership service department. As part of the transition to Techline Connect, GDS 2 is [...]
2014 Volkswagen Polo P106900 Trouble Repair by Launch X431
A Volkswagen New Polo 2014 dashboard turned to system failure warning lights, system failures code “P106900 – collision cutoff has been triggered”. Here www.obd2tool.com [...]
How to send datalog by Autel MaxiIM IM608 or IM608 Pro
How to send datalog after disconnecting from the vehicle and performing function failure by Autel MaxiIM IM608 or IM608 Pro.
Step 1 Click “Data Manager”
Step 2 [...]
How to remove Ford Focus 2008 Launchbox exhaust resonaor
This article show a guide on how to remove Ford Focus 2008 Launchbox exhaust resonaor.The “Lunchbox” in this case is the resonator at the end of the exhaust system closest [...]
How to use Jaguar and Land Rover DoIP Diagnostic Tool SDD Software ?
Topic: How to use Jaguar and Land Rover DoIP Diagnostic Tool SDD Software
1.Run JLR SDD
2.Click SDD
3.Click[Auto VIN Read]
Reading VIN...
4.Click [...]
Autel one year Update Service
Autel MaxiSys MS908P/MK908/Elite/ MS908/MS906/MS906TS/MS906BT/DS808Kit/MaxiIM IM608 one year Update Service
Features:
If your any autel product is over warrantry for [...]
Launch X431 Program Tire Pressure Sensor for Land Rover 2014
After replacing new tire pressure sensors for cars,it requires to perform programming TPMS.So here i will show you guide on how to use Launch X431 to program tire pressure [...]
How to Connect VAS5054 to ODIS-Engineering by Bluetooth
This instruction show you guide on how to build connection between VAS5054A and ODIS-Engineering by bluetooth.
Note:It’s not recommended to use bluetooth connection for [...]
OBDSTAR X300M Mileage Correction for Audi A3 MQB
Audi A3 MQB mileage correction with Mileage Correction obdstar X300M succeed, it is easy to operate by following the instruction made by obdstarstore.com [...]