0

Launch x431 V Oil Reset On Hyundai I10

Here’s the step-by-step guide of how to use Launch X431 V 8 inch Full System Diagnostic Tool to Oil reset on Hyundai I10 2014-2018

Procedure:

launch-x431-v-enable-hyundai-service-interval-01 (2)

Go to “Reset”.

launch-x431-v-enable-hyundai-service-interval-02 (2)

Oil reset.

launch-x431-v-enable-hyundai-service-interval-03 (2)

Tap “OK”.

launch-x431-v-enable-hyundai-service-interval-04 (2)

Go to “Hyundai”.

launch-x431-v-enable-hyundai-service-interval-05 (2)

Switch on ignition as the screen pops up.

launch-x431-v-enable-hyundai-service-interval-06 (2)

It will automatically read out the Vin number.

Tap “General”.

launch-x431-v-enable-hyundai-service-interval-07 (2)

Tap “I10 (IA)”.

launch-x431-v-enable-hyundai-service-interval-08 (2)

2014 – 2018.

launch-x431-v-enable-hyundai-service-interval-09 (2)

Special function.

launch-x431-v-enable-hyundai-service-interval-10 (2)

Service reminder setting.

launch-x431-v-enable-hyundai-service-interval-11 (2)

Tap “OK”.

launch-x431-v-enable-hyundai-service-interval-12 (2)

You see “Coding Not completed”, tap “Workshop”.

launch-x431-v-enable-hyundai-service-interval-13 (2)

Tap “OK”.

launch-x431-v-enable-hyundai-service-interval-14 (2)

Save completed!

Press [OK] button.

launch-x431-v-enable-hyundai-service-interval-15 (2)

Tap “Distance”.

launch-x431-v-enable-hyundai-service-interval-16 (2)

Please input the distance.

launch-x431-v-enable-hyundai-service-interval-17 (2)

Go to “Period”.

launch-x431-v-enable-hyundai-service-interval-18 (2)

Input the period “12”.

launch-x431-v-enable-hyundai-service-interval-19 (2)

Tap “OK”

launch-x431-v-enable-hyundai-service-interval-20 (2)

Save completed!

launch-x431-v-enable-hyundai-service-interval-21 (2)

Tap “Cancel”.

launch-x431-v-enable-hyundai-service-interval-22 (2)

If you go down on the dash, let me write up a bit, let’s go drip drip drip and 365 days and 10000 miles.

launch-x431-v-enable-hyundai-service-interval-23 (2)

So this is how you set up the Service Interval, if it has not been setup, unfortunately you can only do it with the diagnostic machine like X431 V.

All right, thanks, hope it helps.

Leave a Reply

Your email address will not be published. Required fields are marked *