New MB Star SD Connect C4 PLUS DoIP diagnostic multiplexer enables WiFi/WLAN and USB connections. Check the step-by-step wifi setting guide below:

mb-sd-c4-1

mb-sd-c4-2

Open Administration->SDConnect Toolkit

Select Register/configure tab

mb-sd-c4-3

Select the name for SDconnect as 21

Enable both WLAN parameters, workshop and WLAN parameters, road option

Set up IP address, encryption type and key as following:

mb-sd-c4-4

mb-sd-c4-5

WLAN parameters, workshop

IP address: 192.168.191.31

Network screen: 255.255.255.0

Gateway:

SSID (network name): workshop

Encryption: WPA2/ASCII

Key: 123456789

 

WLAN parameters, road

IP address: 192.168.2.223

Network screen: 255.255.255.0

SSID (network name): Road24h

Encryption: WEP/Hex

Key: aaaaaaaaaaaaaaaaaaaaaaaaaa (26*a)

Press Start button

mb-sd-c4-7

You’ll see WLAN and device status turn to yellow on toolbar

mb-sd-c4-6

You are allowed to print out the SD Connect Tool kit configuration settings as well

Close the MB SD C4 DoIP SD Connect Tool kit

mb-sd-c4-8

Open and install Mars free WiFi Hotspot software on desktop

mb-sd-c4-9

mb-sd-c4-10

Set the WiFi name as: workshop and password, then Save

Restart the computer !!!!

WiFi setting is done.

mb-sd-c4-11

Now open the Xentry software on the desktop to start wireless diagnosis

i.e Runs a self-test on a Mercedes Benz C-class W204

mb-sd-c4-12

mb-sd-c4-13

mb-sd-c4-14

mb-sd-c4-15

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website