Keeps Autel MaxiSys Pro MS908P for some days, usually I use it for diagnosis like reading or clearing some faults. Today, I try it to program a new key for Acura TSX 2009. Work like a charm! I have to say that. MS908P with MaxiFlash Pro J2534 box to program keys like a professional key programmer, e.g. SKP900.

Here, I would share my experience of key programming for Acura TSX 2009.

items needed:

The original Acura key

8-2

A spare key to be programmed

8-3

MaxiSys pro MS908P

Autel MaxiFlash Pro J2534 ECU programming tool

My procedure to program a new Acura key

The car starts

Connect MS908 PRO and Autel MaxiFlash Pro J2534 ECU Programming Device with the car

8-4

MaxiSys pro MS908P starts

8-5
Insert the spare key and original key separately to be ON

8-2

8-7
When insert the original key, select Acura on MS908P

8-8
Then USA

8-9

Then Start New Session

8-10 8-11

8-12

Select Diagnosis

8-13

Then Control Unit

8-15

Then IMMOBI (immobilizer)

8-16

Keep the ignition ON until the tester directs you to turn it OFF

8-17

Program keys with a T5 stamped on the blade of the key…
8-18

Diagnostic system initializing…

Select IMMOBILIZER SETUP

8-19

Establishing vehicle communications…

Select ADD AND DELETE KEYS

8-21

Establishing vehicle communications…

Then ADD KEY

8-21
Establishing vehicle communications…

Turn the ignition switch OFF
8-22

Turn the ignition switch ON with an original key

8-23

Turn the ignition switch OFF within 17 seconds

8-24

Turn the ignition switch ON with an new key within 20 seconds

8-25

Turn the ignition switch OFF within 17 seconds

Turn the ignition switch ON within 20 seconds without changing the key

8-26

Turn the ignition switch OFF

Turn the ignition switch ON

Is the immobilizer indicator light turned OFF?

8-27

Then check the immobilizer indicator light

8-28

8-29

Turn the ignition switch ON

The registration of keys has been completed.

Turn the ignition switch OFF

8-30

Then insert the key newly programmed to have a try and make sure that it works

8-31

Successfully programmed a Acura key with Autel MS908P and J2534 ECU programmer

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website