SKP-1000 key programmer is able to program more than 3 smart cards to Land rover Freelander 2 pre-2012 via OBD. Here is the little guide on this. Check below.

13-1

Select Freelander 2 (-2012)
(SKP1000 is also able to program smart card for Discovery 4 (-2012), Range Rover (-2012) and Evoque (-2012) )

13-2

Select Immobilizer system

13-3
Select Old smart card programming
obd key programmer SKP-1000 can also program new smart card, read VIN, read key number and erase fault code for Land rover.
13-4

Require at least 1 registered smart card,
click YES to continue

13-5
Insert registered smart card

13-6

Turn ignition switch to ON position

13-7

Configuring
Wait about 1 minute

13-8

Current key number: 1

13-9

Turn ignition to OFF position

13-10

Remove smart card

13-11

Insert smart card again

13-12

Continue to program next key?
Click Yes to continue

13-13

Remove smart card

13-14

Insert next smart card, if bounce up, insert again

13-15

Stuck the smart card into the key slot firmly
13-16

Continue to program next key?
Press Yes to continue, NO to go back
13-17

Turn ignition ON

13-18

Program success.
Done.!

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website